Download:
iBot v1.1.8b - http://depositfiles.com/files/fs2jmahxw
iBot v1.1.8c - http://www.mediafire.com/?deas8vo6dexvxn8
Edx33 + HSServer - http://www.mediafire.com/?bk11rvfj8a225ja
Note: Please use only the above download link.

Change Log:
v1.1.8c
- Improved time synchronization of iBot with HS Server
v1.1.8b
- Added iphs.ini in iBot to set the IP for HS Server
- Added show IPHS when running HS Server
- Disable HS Server auto hide client (auto hide causes lag on some PC)

Note:
First thing you need to know about iphs.ini,
If you're running HS Server on the same PC then you don't need to set up the iphs.ini (unless it uses a different IP).
HS Server uses the ports 15777 and 15778, so if its block then you need to open those ports.

Please report errors, Thank you.

Using HS Server on different PC

Setting up:
- When you run HS Server it will display the IPHS ip... copy or remember it
- Open iphs.ini, write in the ip shown in HS Server then save it
- After all this, everytime you run iBot...it will try to connect to the specified iphs
- If done properly you should see "HS Server successfully connected!" when you run iBot

Example using 2 different PC:
- 1st PC, running HS Server
- HS Server shows IPHS: 192.168.1.2
- Press "Launch SRO" and wait till it says "Hackshield Server is now ready!"
- Hide everything including HS Server and we are all set on this PC
- 2nd PC, first is setting the iphs.ini
- open iphs.ini, type in 192.168.1.2 and save
- run iBot... if you see "HS Server successfully connected!" then you're ready to go

Download:
iBot v1.1.10 - http://depositfiles.com/files/xn5k6js1y
Note: Please use only the above download link.

Change Log:
v1.1.10
- Update for sro v1.310
- Update data files
- Fix clientless login

Please report errors, Thank you.

iBot - Hackshield Server

Download:
HS Server v2.0 - http://www.mediafire.com/?f9ila09n6lbdaw6
HS Server v2.1 - http://www.mediafire.com/?ye7xmhri9p77tnp

Change Log:
v2.1
- Remove the hardcoded HS Client limitation
- Added error logs when it occurs
- Added pause command on bat file to show errors if there is any
v2.0
- JRE/JVM is required (if you dont have it installed get it at http://java.sun.com)
- Recode into java application coz' of too many false-positive on previous version.

How to use:
- Before you begin, be sure that you already patch media.pk2 using the PHMediaPatcher.exe
- Extract Hackshield v2.0.rar into silkroad folder
- Double-click "Run Hackshield.bat"
- When you see "Waiting for client...", launch silkroad.exe
- Then, click start in the silkroad.exe launcher
- Wait till the message "Waiting for HS Client" appear
- Then, run iBot as you would normally do before (Use clientless login OR Edx33Loader for client)

Please report errors, Thank you.